DESCRIPTION ELECTRIC(AC)PERFORMANCE WITHOUT THE CORD The MULTI VOLT DH36DMA cordless rotary hammer is our first SDS-max cordless rotary hammer that uses the high-power BSL36B18 MULTI VOLT battery and a brushless motor. It delivers a drilling speed and demolition performance comparable to its corded counterpart. Drilling Speed* Speed of the DH40MC rotary hammer indexed at 100. When drilling a Ø25mm hole into concrete with compressive strength of 2,352N/cm2 (240kgf/cm2). Demolition Performance* When demolishing concrete with a compressive strength of 2,352N/cm2 (240kgf/cm2). Runtime per Charge*(with BSL36B18 battery) Approx. 25 Holes (Drilled in Ø25x60L Concrete) Approx. 11 Min. (Equivalent to 26kg Concrete Breaking) Values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions. ROBUST LOOKS With part of its aluminum die-cast cylinder case and crank case exposed, the DH36DMA looks robust and sophisticated. EASE OF USE One-push Bit Mounting Only one action instead of the conventional two is required to mount a bit. All that needs to be done is to insert the bit into the tool holder while turning it. Large Change Lever Large change lever is located on top of the tool body for easy visibility and smooth mode changing. Hammering (for demolition) Neutral (for multiple bit-angle settings) Rotation Hammering (for drilling) Multiple Bit-angle Settings The chisel can be rotated at 12 different angles with the change lever positioned at ‘neutral’. Low Vibration Handle The HiKOKI low vibration handle, which consists of the upper unit with rubber dampers and the lower unit with a hinge, reduces vibration and user fatigue, offering high productivity. Constant Speed Control with Variable Speed Four-step impact rates between 1,420bpm and 2,860bpm can be selected by the rotation speed selector switch. Display Lamp RPM 260 340 410 590 BPM 1,420 1,850 2,240 2,860 SAFETY Battery Stopper A battery stopper helps prevent the battery from accidentally falling out of the tool. The battery cannot be removed unless both the stopper and the battery latches are released. REACTIVE FORCE CONTROL RFC When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool’s built-in controller stops the motor’s output before the entire tool jerks. Caution Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation. SPECIFICATIONS Capacity Concrete 40mm (1-9/16″) Core Bit 105mm (4-1/8″) Bit Shank SDS max Battery Voltage 36V No Load Speed 260 – 590/min Full Load Impact Rate 1,420 – 2,860/min Overall Length 496mm (19-17/32″) Weight*1 7.9kg (17.4lbs.) with BSL36B18 Vibration Total Values*2 (triax vector sum)*2 Hammer Drilling into Concrete Vibration emission value ah, HD = 11.8 m/s2 Uncertainty K = 2.6 m/s2 Equivalent Chiseling Value Vibration emission value ah, CHeq = 9.6 m/s2 Uncertainty K = 1.5 m/s2 Standard Accessories*3 2 Batteries (BSL36B18), Charger (UC18YSL3), Side Handle, Depth Gauge, Battery Cover, Grease A (30g), Carrying Case Weight according to EPTA-Procedure 01/2003. The vibration total values were determined according to EN60745. Supplied accessories vary by country or area.
